The No Zinc Floor Finish product is a safer formulation than the vast majority of finishes available. It is free of zinc, butyl ether and formaldehyde while being lower in ammonia and silicone. Recommended coats 3-4.

Sold in Gallon Container. Each gallon contains 128 fluid ounces.

Directions:

Strips and Recoat: Before application, remove old coatings with clear cut concentrate stripper. Pick up stripper solution using wet vacuum. Thoroughly rinse and neutralize floor. No sealer required except for new floors, very porous floors, or very high traffic. If so, apply 1-2 coats of sealer/finish. Apply 3-4 coats of Zinc-Free Floor Finish. Allow at least 1 minutes after dry to touch between coats.