{"product_id":"super-sani-cloth-germicidal-surface-disinfectant-cleaner-pull-wipes-80-count","title":"Super Sani-Cloth Germicidal Surface Disinfectant Cleaner Pull Wipes 80 Count","description":"\u003ch1\u003eSuper Sani-Cloth® Germicidal Disinfectant Wipes\u003c\/h1\u003e\n\u003cp\u003e\u003cspan class=\"VODHU pdMy8\"\u003eA hospital-grade disinfectant wipe canister (analogous to PDI’s Super Sani-Cloth wipes) ready for use on surfaces. \u003cem\u003eSuper Sani-Cloth® Germicidal Disposable Wipes\u003c\/em\u003e are ready-to-use, 2-in-1 cleaning\/disinfection wipes (EPA Reg. 9480-4) by PDI for hard, non-porous surfaces and non-invasive medical equipment in healthcare settings . Each wipe (approx. 8.2″×9.8″) is soaked in a fast-acting formula combining isopropyl alcohol (~60–70%) with dual quaternary ammonium compounds (“benzalkonium” chlorides). (Notably, the formulation contains \u003cstrong\u003eno chlorine bleach, latex or PHMB\u003c\/strong\u003e.) This alcohol-quat blend yields an “intermediate-level” disinfectant. The product is \u003cstrong\u003ebactericidal, tuberculocidal, virucidal and fungicidal\u003c\/strong\u003e (per EPA) with a rapid contact time: it kills ~32 common pathogens (MRSA, VRE, Pseudomonas, \u003cem\u003eMycobacterium terrae\u003c\/em\u003e (TB), yeasts, etc.) and enveloped viruses (SARS-CoV-2, influenza, hepatitis, vaccinia, etc.) in about 1–2 minutes. It even inactivates emerging pathogens like \u003cem\u003eCandida auris\u003c\/em\u003e and is on EPA’s “List N” for use against COVID-19. (It is \u003cstrong\u003enot sporicidal\u003c\/strong\u003e, so it does not kill C. difficile spores or required glutaraldehyde-level sterilization.)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eComposition and Mechanism\u003c\/h2\u003e\n\u003cp\u003eThe active ingredients are listed as isopropyl alcohol and two quaternary ammonium chlorides (alkyl dimethyl benzyl- and alkyl dimethyl ethylbenzyl-ammonium chloride). In one formulation variant these are ~62% IPA, 0.25% benzalkonium chloride, 0.25% ethylbenzalkonium chloride. The alcohol rapidly denatures proteins and dissolves lipid membranes, while the quats disrupt cell membranes and proteins. In effect, the wipe both \u003cstrong\u003ecleans\u003c\/strong\u003e (solubilizing organic matter and dirt) and \u003cstrong\u003edisinfects\u003c\/strong\u003e (killing the microbes) in one step. The wipes are low-lint and safe on most water-resistant surfaces (plastics, metals, laminates); the formula is specially tested to be compatible with medical device surfaces (IV pumps, monitors, keyboards, etc.) without damaging electronics.\u003c\/p\u003e\n\u003ch2\u003eEfficacy (Spectrum of Kill)\u003c\/h2\u003e\n\u003cp\u003eSuper Sani-Cloth wipes are hospital-grade disinfectants. The manufacturer claims “\u003cstrong\u003e32 kills in 2 minutes\u003c\/strong\u003e” – that is, effective against \u003cem\u003e≥30\u003c\/em\u003e specified organisms within 2 minutes of wet contact. These include Gram-positive and Gram-negative bacteria (e.g. \u003cem\u003eStaph aureus\u003c\/em\u003e including MRSA, \u003cem\u003eEnterococcus\u003c\/em\u003e including VRE, \u003cem\u003eE. coli\u003c\/em\u003e, \u003cem\u003ePseudomonas\u003c\/em\u003e spp., \u003cem\u003eAcinetobacter\u003c\/em\u003e, etc.), multi-drug-resistant organisms (MDROs), \u003cem\u003eMycobacterium terrae\u003c\/em\u003e (surrogate for \u003cem\u003eM. tuberculosis\u003c\/em\u003e), yeasts (\u003cem\u003eCandida albicans\u003c\/em\u003e and \u003cem\u003eC. auris\u003c\/em\u003e), and a broad set of viruses (enveloped viruses like influenza, SARS-CoV-2, HIV, HBV\/HCV, vaccinia \u003cem\u003eand\u003c\/em\u003e even some non-enveloped viruses like norovirus per EN 14476 standards). In short, the product is both \u003cstrong\u003ebactericidal, tuberculocidal, virucidal (including SARS-CoV-2), and fungicidal\u003c\/strong\u003e. (It is worth noting these wipes kill “bloodborne pathogens” and meet CDC\/OSHA\/CMS disinfection guidelines; however they are not shown to kill spores.)\u003c\/p\u003e\n\u003ch2\u003ePackaging and Availability\u003c\/h2\u003e\n\u003cp\u003eThese wipes come in a \u003cstrong\u003esoft-pack pull-wipes dispenser\u003c\/strong\u003e holding 80 cloths. The re-sealable soft pack is about 8.2″×9.8″ and designed for manual one-at-a-time dispensing. It is more portable and uses ~80% less plastic than a rigid canister. (PDI also sells larger formats, e.g. 160-count canisters, XL-size wipes, and individually wrapped packets.) The real advantage of this format is convenience: an 8″×10″ wipe covers large areas, and the pack easily fits on carts or countertops. Wipes are saturated (no activation needed) and sealed to retain moisture until use.\u003c\/p\u003e\n\u003ch2\u003eUsage Instructions\u003c\/h2\u003e\n\u003cp\u003eTo use, \u003cstrong\u003epull out one wipe\u003c\/strong\u003e and unfold it. Wipe the target surface(s) thoroughly in an “S” or back-and-forth motion, applying even pressure (the wipe provides clean, mechanical scrubbing action plus disinfectant release). Ensure the surface stays visibly wet for the labeled contact time (approx. 1–2 minutes). Do not let the wipe dry out on the surface before the full contact time, and do not use the same wipe on multiple distinct surfaces (change wipes as needed). Allow the surface to \u003cstrong\u003eair dry\u003c\/strong\u003e afterwards (no rinsing needed). The liquid evaporates quickly, leaving the area dry. In practice, one might wipe down bed rails, IV poles, exam tables, monitors\/keyboard (see photo) – anywhere rapid decontamination is needed. The wipe simultaneously removes visible soil and disinfects, making it useful for point-of-care cleaning (for example, wiping a bedside table or medical equipment between patients).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePhoto:\u003c\/em\u003e A healthcare worker disinfecting equipment with a wipe – Super Sani-Cloth and similar products are used for quick cleaning\/disinfection of devices and high-touch surfaces.\u003c\/p\u003e\n\u003ch2\u003eSafety and Precautions\u003c\/h2\u003e\n\u003cp\u003eSuper Sani-Cloth is labeled \u003cstrong\u003efor surface use only\u003c\/strong\u003e – it is not for hand antisepsis or injection. Key precautions: because of the high alcohol content, the wipes (and wet surface) are \u003cstrong\u003ehighly flammable\u003c\/strong\u003e. Keep them away from flames or hot surfaces, and let surfaces dry completely before any ignition source or patient contact. Avoid eye contact or prolonged skin contact; if an eye is accidentally exposed, flush with water. Ingredients are EPA-safe but can irritate sensitive skin or eyes. PDI notes the formula has \u003cem\u003eno latex, bleach, phenols, or glutaraldehyde\u003c\/em\u003e, reducing some hazards, but personal protective equipment (gloves) may still be used per facility protocol. Do not use on skin, mucous membranes, or introduce into the body – this product is optimized for hard, inanimate surfaces. After use, discard wipes in trash (not in sharps or laundry).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulatory Notes:\u003c\/strong\u003e This is an EPA-registered intermediate-level disinfectant (Reg. #9480-4) qualified for use in healthcare facilities. It appears on EPA’s List N for SARS-CoV-2 disinfection. The wipes are non-sterile, and have a shelf-life of ~2 years (store closed at room temperature). The packaging and label include standard directions for use against target microbes and relevant safety warnings.\u003c\/p\u003e","brand":"PDI","offers":[{"title":"Default Title","offer_id":53793425391984,"sku":"A22480","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/0350\/files\/SuperSani-ClothGermicidalSurfaceDisinfectantCleanerPullWipes.jpg?v=1779294336","url":"https:\/\/www.mountainside-medical.com\/products\/super-sani-cloth-germicidal-surface-disinfectant-cleaner-pull-wipes-80-count","provider":"Mountainside Medical","version":"1.0","type":"link"}