IV Sets, IV Tubing, IV Administration Sets to PLUM blood IV set
IV Set for Intravenous Infusion Therapy
An IV set (also called an infusion set, IV administration set or giving set) is a sterile tubing system used to deliver fluids, medications or blood products directly into a patient’s bloodstream. In practice, a fluid bag or bottle containing the prescribed solution is hung above the patient, and the IV set connects the bag to the patient’s venous access device. For example, an NHS clinical glossary defines a “giving set” simply as the tubing that transports IV fluids from the bag (or bottle) to the patient, with flow controlled by either an electronic infusion pump or a manual roller clamp. In short, an IV set is the assembly of spike, chamber, tubes and connectors that enables controlled intravenous infusion.
Key Components: A standard IV set typically includes the following parts:
- Spike (piercing tip): A rigid, pointed spike (often molded of plastic) that is inserted into and punctures the port of the IV fluid bag or bottle. This allows fluid to enter the set.
- Drip chamber: A transparent chamber attached below the spike. It lets caregivers see individual drops of fluid flowing, which confirms flow is occurring. It also traps any air bubbles so only liquid continues down the line when the tubing is primed.
- Tubing with flow regulator: Flexible tubing (usually PVC or silicone) carries fluid from the chamber toward the patient. A roller clamp or dial regulator on the tubing allows manual adjustment of flow rate. (Modern sets may include brake clamps or anti-siphon valves for safety.)
- Injection port(s): One or more needle-free injection ports (Y-sites) along the tubing allow secondary medications or bolus doses to be injected without disconnecting the primary line.
- Connector (Luer lock or slip): The distal end of the tubing has a fitting (typically a Luer-lock connector) that securely attaches to the IV catheter or cannula in the patient’s vein. Some sets have a Luer-slip tip for syringe attachment instead.
Use and Flow Control: When in use, the IV fluid bag is hung high (e.g., on an IV pole) so gravity helps push fluid through the tubing. Flow is adjusted by the roller clamp or regulated by an infusion pump. A pump can deliver very precise rates, whereas gravity flow uses the clamp to roughly meter drops per minute. Before connecting to the patient, the line is primed by flushing fluid through the tubing to remove air (preventing air embolism). Each IV set is sterile and generally single-use (disposed of after one patient) to avoid infection. In clinical practice, IV sets can deliver a continuous drip of fluid or can be used intermittently with injections, depending on the therapy.
An IV set is the complete tubing and accessory assembly that safely delivers IV fluids into a patient’s vein. Its design – including the spike, drip chamber, clamps and connectors – ensures that healthcare providers can control the infusion rate and add medications as needed
-
Sale 26%
Original price $ 799.95Current price $ 589.00Primary PLUM Blood IV Set, Secondary Port, 200 Micron Filter, Secure Lock, 110 inches Long 48/Case
ICU MedicalProduct Number: 14211-28 | High-Performance IV Administration Set for Blood & Fluid Transfusion Trusted by Hospitals Nationwide for Safe, Relia...
View full details
IV Set for Intravenous Infusion Therapy
An IV set (also called an infusion set, IV administration set or giving set) is a sterile tubing system used to deliver fluids, medications or blood products directly into a patient’s bloodstream. In practice, a fluid bag or bottle containing the prescribed solution is hung above the patient, and the IV set connects the bag to the patient’s venous access device. For example, an NHS clinical glossary defines a “giving set” simply as the tubing that transports IV fluids from the bag (or bottle) to the patient, with flow controlled by either an electronic infusion pump or a manual roller clamp. In short, an IV set is the assembly of spike, chamber, tubes and connectors that enables controlled intravenous infusion.
Key Components: A standard IV set typically includes the following parts:
- Spike (piercing tip): A rigid, pointed spike (often molded of plastic) that is inserted into and punctures the port of the IV fluid bag or bottle. This allows fluid to enter the set.
- Drip chamber: A transparent chamber attached below the spike. It lets caregivers see individual drops of fluid flowing, which confirms flow is occurring. It also traps any air bubbles so only liquid continues down the line when the tubing is primed.
- Tubing with flow regulator: Flexible tubing (usually PVC or silicone) carries fluid from the chamber toward the patient. A roller clamp or dial regulator on the tubing allows manual adjustment of flow rate. (Modern sets may include brake clamps or anti-siphon valves for safety.)
- Injection port(s): One or more needle-free injection ports (Y-sites) along the tubing allow secondary medications or bolus doses to be injected without disconnecting the primary line.
- Connector (Luer lock or slip): The distal end of the tubing has a fitting (typically a Luer-lock connector) that securely attaches to the IV catheter or cannula in the patient’s vein. Some sets have a Luer-slip tip for syringe attachment instead.
Use and Flow Control: When in use, the IV fluid bag is hung high (e.g., on an IV pole) so gravity helps push fluid through the tubing. Flow is adjusted by the roller clamp or regulated by an infusion pump. A pump can deliver very precise rates, whereas gravity flow uses the clamp to roughly meter drops per minute. Before connecting to the patient, the line is primed by flushing fluid through the tubing to remove air (preventing air embolism). Each IV set is sterile and generally single-use (disposed of after one patient) to avoid infection. In clinical practice, IV sets can deliver a continuous drip of fluid or can be used intermittently with injections, depending on the therapy.
An IV set is the complete tubing and accessory assembly that safely delivers IV fluids into a patient’s vein. Its design – including the spike, drip chamber, clamps and connectors – ensures that healthcare providers can control the infusion rate and add medications as needed