Skip to content

Added to your cart:

Cart subtotal

View cart (2) Checkout
Antibiotic Medications Baxter IV Solutions and Injection Vials Dialysis Center Supplies Gentamicin Sulfate Gentamicin Sulfate IV Bags Injectable Medications IV Bags, IV Sets and Injection Medication Vials Prescription Medications & Prescription Drugs Sodium Chloride IV Bags, Injection, Inhalation and Irrigation Dehydration Relief Products Dextrose IV Bags, Vials and Prefilled Syringes IV Electrolyte Intravenous Solutions Calcium Gluconate Injection & IV Calcium Gluconate Fresenius Kabi Albumin Human 5% and 25% Vials and IV Bags Emergency Medical Supplies (EMS Supplies) EMS Supplies and Trauma Supplies Prescription Drugs and Prescription Medications Dynarex Medical Supplies, Gloves, Gauze IV Sets, IV Tubing, IV Administration Sets Best Selling Products Medical Supplies for Bulk Ordering by Clinics, EMS, and Distributors IV Extension Sets IV Port Sets & IV Tubing Connectors IV Flush Syringes Prefilled Syringes, Autoinjectors, Pre-filled Drug Delivery Systems Sodium Chloride for Injection, IV Bags, Inhalation and Irrigation Fat Emulsion IV Bags Adrenalin Epinephrine Injections Allergic Reaction Medications Epinephrine Injections and EpiPen Autoinjectors Epinephrine Kits Fire Department Medical Supplies Life Support Products Life-Saving Drugs Life-Saving Medications Empty IV Bags and IV Mixing Bags Bacterial Infection Medicines, Antibiotics & Drugs Clindamycin Antibiotic Medications Epilepsy Medicines Vitamin Injections Blood Clotting Products Blood Stopping Products Tranexamic Acid Injections, Tablets & IV Solutions

Filters

Availability
Price
$
-
$
$0 $1495
Pack Size
Type
Volume
Vendor
Collection
Tags

IV Bags, IV Sets, IV Start Kits

IV Bags, IV Sets, IV Start Kits

IV bags are sterile, water-based solutions administered directly into a patient’s vein through an IV catheter. They are used to restore or maintain fluid balance, electrolytes, and nutrients, and to deliver medications rapidly into the bloodstream. Common hospital indications include correcting dehydration (e.g. from vomiting or diarrhea), replacing blood volume (e.g. in shock or bleeding), balancing electrolytes (sodium, potassium, chloride), maintaining blood pressure, and providing parenteral nutrition when oral intake is insufficient. IV therapy acts quickly since it bypasses the gut, making it indispensable in emergent and perioperative care. Because IV solutions are essentially medications, they must be prescribed, labeled, and administered with the same vigilance as any drug.

Most modern IV bags are flexible plastic containers made from PVC or non-PVC materials such as polyolefin or EVA. Some products still come in glass bottles or semi-rigid containers. The bag material matters because certain medications adsorb to PVC, require light protection, or require special tubing.

Types of IV Fluids

IV fluids fall into two broad categories: crystalloids and colloids. Crystalloids contain small solutes (electrolytes, sugars) that easily cross cell membranes; they distribute into both the vascular and interstitial spaces. Colloids contain larger molecules (proteins or polysaccharides) that largely remain in the bloodstream, increasing oncotic pressure and drawing fluid intravascularly.

  • Crystalloids (electrolyte solutions): These are the workhorses of IV therapy and are classified by tonicity-relative-to-plasma. Typical examples include:

    • 0.9% Sodium Chloride (Normal Saline, NS): A non-buffered, isotonic solution of sodium and chloride (154 mEq/L each). It expands extracellular fluid volume and is widely used for resuscitation (e.g. in hypovolemic shock, dehydration). (Large volumes of NS can cause hyperchloremic metabolic acidosis.)
    • Balanced Isotonic Solutions: e.g., Lactated Ringer’s (LR) and Plasma-Lyte (Normosol). These contain multiple electrolytes more closely matching plasma. For instance, LR has Na ~130 mEq/L, K 4, Ca 1.4–1.5, Cl 109, and lactate 28 mmol/L. Plasma-Lyte A has Na 140, K 5, Mg 1.5, Cl 98, acetate 27, gluconate 23 (no calcium). The lactate or acetate in LR/Plasma-Lyte acts as a bicarbonate precursor, so balanced solutions tend to better maintain acid–base balance than normal saline. These fluids are used similarly to NS (e.g. surgical resuscitation, maintenance), with the caveat that LR (containing calcium) is usually not run simultaneously with blood products.
    • Dextrose 5% in Water (D5W): Initially isotonic (252 mOsm/L) but effectively hypotonic once the glucose is metabolized. D5W delivers free water and about 170 kcal/L. It is used for maintenance fluid and to provide calories, but it does not expand intravascular volume (it distributes into total body water). Importantly, dextrose solutions should not be mixed with blood products (they can cause red-cell hemolysis)..
    • Hypotonic Saline: e.g., 0.45% NaCl (half-normal saline) and 0.33% NaCl (one-third NS). These solutions have lower osmolarity than plasma and drive fluid into cells. They are used to treat intracellular dehydration (e.g. hypernatremic dehydration), but must be used carefully to avoid causing hyponatremia and cerebral edema. (Because D5W becomes hypotonic after the sugar is used, it also falls in this category.)
    • Combination Fluids: e.g., D5NS (5% dextrose in 0.9% NaCl) and D5½NS (5% dextrose in 0.45% NaCl). These provide both sodium and glucose. For example, normal saline with 5% dextrose is preferred over plain NS for daily maintenance fluids as it supplies some calories to prevent starvation ketosis.
    • Hypertonic Solutions: e.g., 3% or 5% NaCl for severe hyponatremia or cerebral edema (these aggressively pull water out of cells), and high-concentration dextrose solutions. 10% Dextrose (D10W) provides 380 kcal/L and free water; it is hypertonic and typically given via a central line (and never with blood products) to treat starvation ketosis. 20% Dextrose (D20W) is an osmotic diuretic causing fluid shifts and diuresis. 50% Dextrose (D50W) is a very hypertonic solution used as an IV bolus to treat severe hypoglycemia. These high-dextrose fluids must be administered slowly (D20+) and usually through a central venous catheter if given continuously.

  • Colloids (plasma expanders): These contain large molecules that remain in the vascular compartment, increasing oncotic pressure and drawing fluid into blood vessels. They expand plasma volume more effectively per unit infused than crystalloids, but are more expensive and carry allergic risks. Common colloid solutions include:

    • Human Albumin: Available as 5% or 25% solutions. Albumin 5% is approximately isotonic and replaces volume in hypoalbuminemic states (e.g. burns, cirrhosis); 25% albumin is hyperoncotic and draws fluid into vessels (used in shock or hypoalbuminemia to raise oncotic pressure).
    • Dextrans: Polysaccharide colloids (Dextran 40 and Dextran 70). Dextran 40 (molecular weight ~40,000) improves microcirculation and is used in hypovolemic shock (e.g. trauma, burn). Dextran 70 (MW ~70,000–75,000) is a potent volume expander for hypotensive shock. Dextrans contain no electrolytes and must be given carefully (they can interfere with blood cross-matching and cause allergic reactions).
    • Hydroxyethyl Starch (HES): Synthetic colloids (e.g. hetastarch, Voluven) derived from modified starch. They effectively expand intravascular volume but can impair coagulation. (Due to risk of coagulopathy and renal injury, HES use is limited.)
    • Gelatin Solutions: Modified bovine gelatin colloids (e.g. Gelofusine) of lower molecular weight than starches; they expand volume but remain intravascular for a shorter time.
    • Plasma Protein Fraction/Other: Rarely used now, these are pooled plasma proteins. (Fresh frozen plasma is a related blood product containing clotting factors, used for coagulation support rather than routine volume expansion.)

IV Bag Volumes and Equipment

IV fluids come in pre-packaged sterile bags made of plastic or glass. Standard adult bag volumes are 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL. The 1000 mL bag is most common for continuous infusions in adults. Smaller bags (100–250 mL) are used for pediatric patients or intermittent infusions (e.g. bolus of medication). In special cases like total parenteral nutrition (TPN or “hyperalimentation”), very large bags (1500–3000 mL) with multiple compartments may be used. Each bag has a sterile access port (for hooking up to the IV tubing spike) and may have injection ports for additives.

Primary IV tubing connects the fluid bag to the patient’s catheter. It can be a macrodrip set (20, 15, or 10 drops/mL) or a microdrip set (60 drops/mL). Macrodrip sets are standard for routine adult maintenance fluids, allowing faster rates; microdrip sets are used for precise low-rate infusions or pediatrics. The plastic drip chamber in the tubing should be kept about half-full of fluid so that air can collect above it (allowing safe infusions and enabling counting of drops when gravity-fed). IV pumps are often used to deliver fluids at a preset volume/time (mL/hr). If pumps are unavailable, fluids can be given by gravity drip, requiring calculation of drops/minute using the tubing’s drop factor.

Administration and Nursing Considerations

  • Orders and Preparation: Always verify the physician’s order (fluid type, concentration, total volume, rate, and any additives). Check the IV bag label carefully: confirm solution type, concentration, expiration date, and that the bag is intact and clear (no particulate matter). Common strengths to know include 0.9% NS, 0.45% NS, 5% Dextrose, 3%/5% NaCl, etc. Adhere to aseptic technique when spiking the bag and priming tubing (filling the line with fluid) to eliminate air bubbles. Label each hung bag/tubing per hospital policy (time mixture prepared, initials).

  • Hanging and Infusing: Hang the IV bag on a pump or drip pole above the patient’s heart. Use an IV pump when precise rate control is needed (e.g. pediatrics or critical fluids). For gravity infusions, set the roller clamp to achieve the prescribed rate in drops/minute. Macrodrip tubing might be 15 or 20 drops/mL (noted on the packaging). For example, if using a 20 gtt/mL set, 1000 mL over 8 hours = (1000 mL × 20 drops/mL)/(480 min) ≈ 42 drops/min. (Calculations are routine for nurses when pumps are unavailable.)

  • Monitoring: Nurses must closely monitor the patient and the IV site. Before starting an IV fluid, document baseline vital signs, heart/lung sounds, and the condition of the IV site. Then, periodically assess:

    • IV Site Checks: Look for patency, absence of swelling or redness. Watch for infiltration (fluid leaking into tissue) or extravasation if the fluid/med is irritating. Infiltration causes coolness/swelling at the site; if noted, stop the infusion and restart IV in another site. Also check for phlebitis (pain, redness along vein) and signs of infection. If any complication occurs, discontinue that IV catheter and notify the provider. (For example, extravasation of a vesicant drug requires specific antidotes.)
    • Patient Monitoring: Measure intake and output (I&O) closely. Monitor vital signs (pulse, blood pressure, respiratory rate), and watch for signs of fluid overload (e.g. edema, crackles, hypertension). Obtain relevant labs – e.g. electrolytes, hematocrit, blood glucose – to gauge effect of the fluids. For example, large volumes of NS can raise serum chloride and risk metabolic acidosis; dextrose infusions will raise blood sugar. If infusing high-sodium fluids (like 3% saline) or rapid infusions, the patient may need ICU-level monitoring (frequent neuro checks, blood chemistries).
    • Electrolytes: If the order includes additives (e.g. potassium chloride in IV fluids), double-check calculations. Remember that common IV additive KCl is often given in 10–20 mEq increments per 1000 mL. Never give potassium as an IV push (it can stop the heart). Monitor ECG/telemetry when infusing KCL. Likewise, be aware that bicarb or acetate in fluids can affect acid–base balance.

  • Specific Safety Notes:

    • Compatibility: Some fluids should not mix. For example, do not infuse Lactated Ringer’s with blood products if possible (calcium in LR can bind citrate in blood). Similarly, avoid attaching tubing with dextrose solutions to ongoing blood transfusions (risk of hemolysis). Check compatibility for any IV medications added (e.g. phenytoin incompatibilities, or whether an IV antibiotic can be piggybacked).
    • Central vs Peripheral: Use of central venous access (central line) is recommended for hypertonic or long-term infusions (like D10W, TPN, or irritant drugs). Peripheral veins should not be used for high-Ca or high-osmolality solutions (they can cause severe vein irritation or thrombosis).
    • Allergy History: Take care with colloids and certain fluids: ask if the patient has allergies to albumin, gelatin, or previous IV reactions. Colloids in particular can cause anaphylaxis (rare, but possible). Always have resuscitation equipment at hand when giving new colloids.

  • Documentation and Follow-Up: Document type and amount of fluid infused, rate, time started/stopped, and patient response. Reassess patient and lab values regularly, adjusting the IV order as needed (e.g. MD may change rate or solution). When infusions are interrupted or completed, note the stop time. When discontinuing an IV line, note the reason (infusion complete, complication, patient request, etc.).

Key Points: Nurses play a crucial role in IV therapy management. Responsibilities include inspecting the IV site, preparing and hanging the IV bag, setting up secondary “piggyback” infusions if needed, calculating and monitoring the drip rate, and observing for efficacy and complications. Because IV fluids act quickly—once in the vein their effect cannot be easily reversed—careful attention to orders, aseptic technique, and monitoring is vital. By understanding the properties (tonicity, electrolytes, calories) of each solution and following best practices (hand hygiene, equipment checks, careful monitoring), nurses and clinicians can safely use IV bags to support patient care.

Sodium Chloride IV Bags      Lactated Ringer IV Bags       Dextrose IV Bags       Sterile Water IV Bags       Acetaminophen IV Bags        DOPamine Hydrochloride      Lidocaine IV Bags      Potassium Chloride       Amino Acid       Tranexamic Acid      Famotidine        Gentamicin Sulfate        IV Sets        IV Start Kits        IV poles        IV Ports & Connectors      IV Extension Sets       IV Flush Syringes          Tourniquets  

IV Bag Informational Chart by Mountainside Medical

People Also Searched For

IV Bags, IV Sets, IV Start Kits to doctor-only IV Bags, IV Sets, IV Start Kits to Iv Bags IV Bags, IV Sets, IV Start Kits to IV Bag IV Bags, IV Sets, IV Start Kits to Iv Sets IV Bags, IV Sets, IV Start Kits to IV Catheter Needle IV Bags, IV Sets, IV Start Kits to IV Catheter Needles IV Bags, IV Sets, IV Start Kits to Sodium Chloride IV Bags, IV Sets, IV Start Kits to Sodium Chloride 0.9 IV Bags, IV Sets, IV Start Kits to IV Administration Set IV Bags, IV Sets and Injection Medication Vials

IV Bags, IV Sets, IV Start Kits

IV bags are sterile, water-based solutions administered directly into a patient’s vein through an IV catheter. They are used to restore or maintain fluid balance, electrolytes, and nutrients, and to deliver medications rapidly into the bloodstream. Common hospital indications include correcting dehydration (e.g. from vomiting or diarrhea), replacing blood volume (e.g. in shock or bleeding), balancing electrolytes (sodium, potassium, chloride), maintaining blood pressure, and providing parenteral nutrition when oral intake is insufficient. IV therapy acts quickly since it bypasses the gut, making it indispensable in emergent and perioperative care. Because IV solutions are essentially medications, they must be prescribed, labeled, and administered with the same vigilance as any drug.

Most modern IV bags are flexible plastic containers made from PVC or non-PVC materials such as polyolefin or EVA. Some products still come in glass bottles or semi-rigid containers. The bag material matters because certain medications adsorb to PVC, require light protection, or require special tubing.

Types of IV Fluids

IV fluids fall into two broad categories: crystalloids and colloids. Crystalloids contain small solutes (electrolytes, sugars) that easily cross cell membranes; they distribute into both the vascular and interstitial spaces. Colloids contain larger molecules (proteins or polysaccharides) that largely remain in the bloodstream, increasing oncotic pressure and drawing fluid intravascularly.

  • Crystalloids (electrolyte solutions): These are the workhorses of IV therapy and are classified by tonicity-relative-to-plasma. Typical examples include:

    • 0.9% Sodium Chloride (Normal Saline, NS): A non-buffered, isotonic solution of sodium and chloride (154 mEq/L each). It expands extracellular fluid volume and is widely used for resuscitation (e.g. in hypovolemic shock, dehydration). (Large volumes of NS can cause hyperchloremic metabolic acidosis.)
    • Balanced Isotonic Solutions: e.g., Lactated Ringer’s (LR) and Plasma-Lyte (Normosol). These contain multiple electrolytes more closely matching plasma. For instance, LR has Na ~130 mEq/L, K 4, Ca 1.4–1.5, Cl 109, and lactate 28 mmol/L. Plasma-Lyte A has Na 140, K 5, Mg 1.5, Cl 98, acetate 27, gluconate 23 (no calcium). The lactate or acetate in LR/Plasma-Lyte acts as a bicarbonate precursor, so balanced solutions tend to better maintain acid–base balance than normal saline. These fluids are used similarly to NS (e.g. surgical resuscitation, maintenance), with the caveat that LR (containing calcium) is usually not run simultaneously with blood products.
    • Dextrose 5% in Water (D5W): Initially isotonic (252 mOsm/L) but effectively hypotonic once the glucose is metabolized. D5W delivers free water and about 170 kcal/L. It is used for maintenance fluid and to provide calories, but it does not expand intravascular volume (it distributes into total body water). Importantly, dextrose solutions should not be mixed with blood products (they can cause red-cell hemolysis)..
    • Hypotonic Saline: e.g., 0.45% NaCl (half-normal saline) and 0.33% NaCl (one-third NS). These solutions have lower osmolarity than plasma and drive fluid into cells. They are used to treat intracellular dehydration (e.g. hypernatremic dehydration), but must be used carefully to avoid causing hyponatremia and cerebral edema. (Because D5W becomes hypotonic after the sugar is used, it also falls in this category.)
    • Combination Fluids: e.g., D5NS (5% dextrose in 0.9% NaCl) and D5½NS (5% dextrose in 0.45% NaCl). These provide both sodium and glucose. For example, normal saline with 5% dextrose is preferred over plain NS for daily maintenance fluids as it supplies some calories to prevent starvation ketosis.
    • Hypertonic Solutions: e.g., 3% or 5% NaCl for severe hyponatremia or cerebral edema (these aggressively pull water out of cells), and high-concentration dextrose solutions. 10% Dextrose (D10W) provides 380 kcal/L and free water; it is hypertonic and typically given via a central line (and never with blood products) to treat starvation ketosis. 20% Dextrose (D20W) is an osmotic diuretic causing fluid shifts and diuresis. 50% Dextrose (D50W) is a very hypertonic solution used as an IV bolus to treat severe hypoglycemia. These high-dextrose fluids must be administered slowly (D20+) and usually through a central venous catheter if given continuously.

  • Colloids (plasma expanders): These contain large molecules that remain in the vascular compartment, increasing oncotic pressure and drawing fluid into blood vessels. They expand plasma volume more effectively per unit infused than crystalloids, but are more expensive and carry allergic risks. Common colloid solutions include:

    • Human Albumin: Available as 5% or 25% solutions. Albumin 5% is approximately isotonic and replaces volume in hypoalbuminemic states (e.g. burns, cirrhosis); 25% albumin is hyperoncotic and draws fluid into vessels (used in shock or hypoalbuminemia to raise oncotic pressure).
    • Dextrans: Polysaccharide colloids (Dextran 40 and Dextran 70). Dextran 40 (molecular weight ~40,000) improves microcirculation and is used in hypovolemic shock (e.g. trauma, burn). Dextran 70 (MW ~70,000–75,000) is a potent volume expander for hypotensive shock. Dextrans contain no electrolytes and must be given carefully (they can interfere with blood cross-matching and cause allergic reactions).
    • Hydroxyethyl Starch (HES): Synthetic colloids (e.g. hetastarch, Voluven) derived from modified starch. They effectively expand intravascular volume but can impair coagulation. (Due to risk of coagulopathy and renal injury, HES use is limited.)
    • Gelatin Solutions: Modified bovine gelatin colloids (e.g. Gelofusine) of lower molecular weight than starches; they expand volume but remain intravascular for a shorter time.
    • Plasma Protein Fraction/Other: Rarely used now, these are pooled plasma proteins. (Fresh frozen plasma is a related blood product containing clotting factors, used for coagulation support rather than routine volume expansion.)

IV Bag Volumes and Equipment

IV fluids come in pre-packaged sterile bags made of plastic or glass. Standard adult bag volumes are 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL. The 1000 mL bag is most common for continuous infusions in adults. Smaller bags (100–250 mL) are used for pediatric patients or intermittent infusions (e.g. bolus of medication). In special cases like total parenteral nutrition (TPN or “hyperalimentation”), very large bags (1500–3000 mL) with multiple compartments may be used. Each bag has a sterile access port (for hooking up to the IV tubing spike) and may have injection ports for additives.

Primary IV tubing connects the fluid bag to the patient’s catheter. It can be a macrodrip set (20, 15, or 10 drops/mL) or a microdrip set (60 drops/mL). Macrodrip sets are standard for routine adult maintenance fluids, allowing faster rates; microdrip sets are used for precise low-rate infusions or pediatrics. The plastic drip chamber in the tubing should be kept about half-full of fluid so that air can collect above it (allowing safe infusions and enabling counting of drops when gravity-fed). IV pumps are often used to deliver fluids at a preset volume/time (mL/hr). If pumps are unavailable, fluids can be given by gravity drip, requiring calculation of drops/minute using the tubing’s drop factor.

Administration and Nursing Considerations

  • Orders and Preparation: Always verify the physician’s order (fluid type, concentration, total volume, rate, and any additives). Check the IV bag label carefully: confirm solution type, concentration, expiration date, and that the bag is intact and clear (no particulate matter). Common strengths to know include 0.9% NS, 0.45% NS, 5% Dextrose, 3%/5% NaCl, etc. Adhere to aseptic technique when spiking the bag and priming tubing (filling the line with fluid) to eliminate air bubbles. Label each hung bag/tubing per hospital policy (time mixture prepared, initials).

  • Hanging and Infusing: Hang the IV bag on a pump or drip pole above the patient’s heart. Use an IV pump when precise rate control is needed (e.g. pediatrics or critical fluids). For gravity infusions, set the roller clamp to achieve the prescribed rate in drops/minute. Macrodrip tubing might be 15 or 20 drops/mL (noted on the packaging). For example, if using a 20 gtt/mL set, 1000 mL over 8 hours = (1000 mL × 20 drops/mL)/(480 min) ≈ 42 drops/min. (Calculations are routine for nurses when pumps are unavailable.)

  • Monitoring: Nurses must closely monitor the patient and the IV site. Before starting an IV fluid, document baseline vital signs, heart/lung sounds, and the condition of the IV site. Then, periodically assess:

    • IV Site Checks: Look for patency, absence of swelling or redness. Watch for infiltration (fluid leaking into tissue) or extravasation if the fluid/med is irritating. Infiltration causes coolness/swelling at the site; if noted, stop the infusion and restart IV in another site. Also check for phlebitis (pain, redness along vein) and signs of infection. If any complication occurs, discontinue that IV catheter and notify the provider. (For example, extravasation of a vesicant drug requires specific antidotes.)
    • Patient Monitoring: Measure intake and output (I&O) closely. Monitor vital signs (pulse, blood pressure, respiratory rate), and watch for signs of fluid overload (e.g. edema, crackles, hypertension). Obtain relevant labs – e.g. electrolytes, hematocrit, blood glucose – to gauge effect of the fluids. For example, large volumes of NS can raise serum chloride and risk metabolic acidosis; dextrose infusions will raise blood sugar. If infusing high-sodium fluids (like 3% saline) or rapid infusions, the patient may need ICU-level monitoring (frequent neuro checks, blood chemistries).
    • Electrolytes: If the order includes additives (e.g. potassium chloride in IV fluids), double-check calculations. Remember that common IV additive KCl is often given in 10–20 mEq increments per 1000 mL. Never give potassium as an IV push (it can stop the heart). Monitor ECG/telemetry when infusing KCL. Likewise, be aware that bicarb or acetate in fluids can affect acid–base balance.

  • Specific Safety Notes:

    • Compatibility: Some fluids should not mix. For example, do not infuse Lactated Ringer’s with blood products if possible (calcium in LR can bind citrate in blood). Similarly, avoid attaching tubing with dextrose solutions to ongoing blood transfusions (risk of hemolysis). Check compatibility for any IV medications added (e.g. phenytoin incompatibilities, or whether an IV antibiotic can be piggybacked).
    • Central vs Peripheral: Use of central venous access (central line) is recommended for hypertonic or long-term infusions (like D10W, TPN, or irritant drugs). Peripheral veins should not be used for high-Ca or high-osmolality solutions (they can cause severe vein irritation or thrombosis).
    • Allergy History: Take care with colloids and certain fluids: ask if the patient has allergies to albumin, gelatin, or previous IV reactions. Colloids in particular can cause anaphylaxis (rare, but possible). Always have resuscitation equipment at hand when giving new colloids.

  • Documentation and Follow-Up: Document type and amount of fluid infused, rate, time started/stopped, and patient response. Reassess patient and lab values regularly, adjusting the IV order as needed (e.g. MD may change rate or solution). When infusions are interrupted or completed, note the stop time. When discontinuing an IV line, note the reason (infusion complete, complication, patient request, etc.).

Key Points: Nurses play a crucial role in IV therapy management. Responsibilities include inspecting the IV site, preparing and hanging the IV bag, setting up secondary “piggyback” infusions if needed, calculating and monitoring the drip rate, and observing for efficacy and complications. Because IV fluids act quickly—once in the vein their effect cannot be easily reversed—careful attention to orders, aseptic technique, and monitoring is vital. By understanding the properties (tonicity, electrolytes, calories) of each solution and following best practices (hand hygiene, equipment checks, careful monitoring), nurses and clinicians can safely use IV bags to support patient care.

Sodium Chloride IV Bags      Lactated Ringer IV Bags       Dextrose IV Bags       Sterile Water IV Bags       Acetaminophen IV Bags        DOPamine Hydrochloride      Lidocaine IV Bags      Potassium Chloride       Amino Acid       Tranexamic Acid      Famotidine        Gentamicin Sulfate        IV Sets        IV Start Kits        IV poles        IV Ports & Connectors      IV Extension Sets       IV Flush Syringes          Tourniquets  

IV Bag Informational Chart by Mountainside Medical

Get Notified When Back in Stock